Configure Dhcp - ZyXEL Communications LTE Series User Manual
Hide thumbs
Also See for LTE Series:
- User manual (305 pages) ,
- User manual (179 pages) ,
- User manual (235 pages)
Table of Contents
Advertisement
Chapter 4 Tutorials
3
The Zyxel Device will restart automatically after the configuration file is successfully uploaded. Wait for
one minute before logging into the Zyxel Device again.
4.9 C o nfig ure DHC P
You can enable the DHCP (Dynamic Host Configuration Protocol) in your Zyxel Device to assign IP
addresses and DNS servers to systems that support DHCP client capability. DHCP allows clients to obtain
TCP/IP configuration at start-up from a server.
The following figure shows how
uses DHCP to join the Zyxel Device's network. First Client A
C lie nt A
searches for an available DHCP, and sends a
broadcast message asking for an IP
DHC P Disc o ve r
address to connect to. Then the DHCP selects an IP address from its pool of IP addresses for Client A. The
DHCP sends a
including the IP address selected and a lease time, which is the period of time
DHC P O ffe r
Client A will be able to use this IP address, After Client A has received DHCP offers for an IP address, it
chooses one and sends out a
including the IP address it chose. Finally the DHCP confirms
DHC P Re q ue st
LTE Series User's Guide
45
Advertisement
Table of Contents
