Routing; C Ha Pte R 8 Ro Uting; Overview; Configure Static Route - ZyXEL Communications LTE Series User Manual

8.1 O ve rvie w
The Zyxel Device usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the Zyxel Device send data to devices not reachable through the default
gateway, use static routes.
For example, the next figure shows a computer (
Zyxel Device routes most traffic from
You create one static route to connect to services offered by your ISP behind router
another static route to communicate with a separate network behind a router
LAN.
Example of Static Routing Topology
Fig ure 72
A
R3
8.2 C o nfig ure Sta tic Ro ute
Use this screen to view and configure static route rules on the Zyxel Device. A static route is used to save
time and bandwidth usage when LAN devices within an Intranet are transferring files or packets,
especially when there are more than two Internet connections in your home or office network. Click
Ne two rk Se tting > Ro uting
to the Internet through the Zyxel Device's default gateway (
A
LAN
to open the
Sta tic Ro ute
LTE Series User's Guide
98
C
HA PTER
) connected to the Zyxel Device's LAN interface. The
A
R1
WAN
R2
screen.
Ro uting
. You create
R2
connected to the
R3
8
).
R1