Table of Contents
Advertisement
Receiving Camera Images via LAN
The Trigger Mode function can be used to save and transmit video/audio from KA-DV350 to your PC by synchronizing to
the button operations of GY-DV300.
Synchronizing with the button operations of GY-DV300
REC START/STOP button
POWER
switch
MODE
switch
GY-DV300 rear panel
NETWORK PACK CONFIG
menu screen
1.
Set MPEG REC in the NETWORK PACK CONFIG menu to
"TRIG" or "SPLIT" using steps 1 to 8 of page 21.
N
E
TW
OR
K
P
A CK
C
ON
F
I G
NET WOR K
MA N I
S E
T
U
P
. .
• TRIG: Records/transmits video/audio streaming data to your
EN CODE S E T
U
P
. .
MPE G R EC
TR G
I
MOV I E CL
I P
S E T
U
P
. .
MENU R E S E T
C AN CE L
PAGE B ACK
( WM
P
u n d
e r
8
) ( C F V i e w e r )
• SPLIT: Records/transmits video/audio streaming data to your
2.
Click the CAPTURE-TRIG./CAST-TRIG. button in the
Streamcapture screen.
NETWORK MAIN SETUP
Setting
menu screen
• Button lights and the program enters the trigger standby
☞
(
page 14)
• When the CAPTURE-TRIG. button is on:
• When the CAST-TRIG. button is on:
• When saving and transmitting video/audio at the same
3.
Turning trigger on
• When KA-DV350 is in the TRIG mode:
CAPTURE-TRIG.
CAST-TRIG.
• When KA-DV350 is in the SPLIT mode:
button
button
• Saving of file or transmission will start on the PC.
4.
Turning trigger off
• When KA-DV350 is in the TRIG mode:
• When KA-DV350 is in the SPLIT mode:
• File recording on the PC will end. Furthermore, Transmitted
Using a simplified viewer
(Streamcapture)
Handle
POWER
OFF
ON
MODE
CAM-B
CAM-A
VTR
GAIN
SHUTTER
BAR
REC START/STOP button
PC at the same time as the recording to the DV cassette
tape set in GY-DV300.
PC regardless of whether the DV cassette is set.
mode.
Saves the video/audio from KA-DV350 to your PC by syn-
chronizing to the button operations of GY-DV300.
Transmits video/audio from KA-DV350 to another PC by
synchronizing to the button operations of GY-DV300.
time, light both CAPTURE-TRIG. and CAST-TRIG. buttons.
Press the REC START/STOP button of GY-DV300.
Press the SELECT dial of GY-DV300.
Press the REC START/STOP button of GY-DV300.
Press the SELECT dial of GY-DV300.
video screen will display color bars.
Distributing Camera Images via LAN
The Cast function can be used to send video/audio of KA-DV350 from this PC to another PC.
Sending method
Display the video to send in the video display window of the Streamcapture
screen and click the CAST-CAM button.
<Color bar transmission>
When clicking the BARS button, color bars are transmitted rather than the
video from KA-DV350.
• Video of the receiving side will be displayed with color bars.
• Click the CAST button to switch back to the transmission of video from
KA-DV350.
• To stop the transmission of video from KA-DV350/color bars, turn off the
CAST-CAM/CAST-BARS button.
In this case, the connection with the receiving side will be disconnected.
<Trigger transmission>
When transmitting video/audio from KA-DV350 to another PC by synchro-
nizing to the button operations of GY-DV300, click the CAST-TRIG. button.
☞
(
page 73)
72
Distributing the video data
captured by the GY-DV300
CAST-
CAST-
CAST-
CAM
BARS
TRIG.
button
button
button
Memo
Memo
Video from KA-DV350 will be dis-
played in the video display of the
Streamcapture screen. Color bars
will not be displayed.
73
Advertisement
Chapters
Table of Contents
