Option Dialog - JVC KA-DV350U Instructions Manual

The following information is available by clicking on the 'Connections' tab.
Internet URL
Shows the internet URL that users who want to receive the cast video
must use for Windows Media Player.
For details on the process of receiving the casting image, refer to
Section 5 "Receiving the video stream from Streamproducer".
More than one URL will be listed if you are in multi network connections.
Use the URL of the interface not connected to the streamcorder, unless
only one interface is used to connect to both the streamcorder and the
internet through a switch.
LAN URL
When connecting via a local LAN, you can use this LAN name instead
of the Internet URL for viewing the video stream with Windows Media
Player.
Copy Internet URL
This button is a shortcut for copying the Internet URL to Clipboard so that you can paste it into the address bar
of another application such as your own Windows Media Player for testing, or into your message to inform the
URL to your clients by e-mail.
Copy LAN URL
This button is a shortcut for copying the LAN URL so that you can paste it into the address bar of another
application, such as Windows Media Player.
Clients
This window shows the IP addresses of the clients connected to your streamproducer.
23

6.2 Option dialog

Options, such as selecting the folder for saving video streams, casting ports and the number of video windows
can be selected by choosing [Option...] from the [Tool] pull-down menu of Streamproducer.
Maximum Clients
The number of clients that can connect to Streamproducer at the same time. The maximum is 10. You can only
set this parameter when not connected to any streamcorder or file.
Capture casting contents simultaneously
Checking this box captures the cast video stream to a file. This option must be enabled before casting begins.
You can only set this parameter when not connected to any streamcorder or file.
Video Window
If you are only connecting to one or two streamcorders, you can use this field to change the number of Video
display windows. You can only set this parameter when not connected to any streamcorder or file.
Network buffering
This function is for making the received images stabled by storing some image data from the streamcorder in
your PC before displaying. The amount (time) of image data for storing can be selected from 1 second to 5
seconds. It means that the longer buffering possibly provides the stabled image if the network is in poor
condition.
Capturing Folder
You can specify the disk drive and folder to save
recorded images. A subfolder is automatically
created under the specified folder according to
the connected streamcorder name, and the
video clips are stored in this subfolder. For this
reason, we recommend that each connected
streamcorder be given a unique name.
You can type in a folder path directly, or you can
click the [Browse...] button to search for an
appropriate drive and folder.
HTTP Port
This field allows you to specify the HTTP port
number for casting. An unused port number can
be found by clicking the [Find Free Port] button.
You can only set this parameter when not
connected to any streamcorder or file.
24