Table of Contents
Advertisement
Installation
Installation Procedures
1. Mounting KY-F560 Camera on this Unit.
2. Mounting the Lens onto the Camera.
3. Mounting this Unit onto the Tripod.
4. Mounting VF-P400 4-inch Viewfinder on this Unit.
Mounting KY-F560 Camera on this Unit
1.
Screw
Slot cover
Camera mounting bracket
2.
Screw
Camera mounting frame
14
1.
Preparations to be done on KY-F560 cam-
era.
● If the lens is attached to KY-F560 cam-
era, remove and place it aside.
● Attached the camera mounting bracket
at the bottom of the camera.
● Remove 2 screws
from the rear of
the camera and take out the slot cover.
2.
Loosen 2 screws
of this unit and pull
out the camera mounting frame.
Mounting KY-F560 Camera on this Unit (continued)
3.
Mounting bracket
Screw
Camera mounting frame
4.
Screw
5.
Slot
Relay board
Screw
3.
Place the camera on top of the camera
mounting frame and use the screw
vided to secure the camera to the base of
the frame.
Use the camera mounting bracket screw
hole to secure the camera.
4.
After the camera mounting frame is in-
serted into this unit, secure it by screwing
back the 2 screws
which were taken
2.
out earlier in above-mentioned step
Notes
● Please remove the camera lens mount
cap before hand.
● Before inserting the camera mounting
frame into this unit, turn the lens secure
lever located in front of
the camera clockwise to
move it to a lower posi-
tion. If the lever remains
at the upper position, it
may hit this unit when the
frame is being inserted.
Lever
5.
Insert this unit's relay board into the slot
at the rear of the camera and secure it by
screwing back the 2 screws
which were
taken out earlier in above-mentioned
1.
step
.
Note
Ensure that the relay board is inserted
all the way in.
pro-
.
15
Advertisement
Chapters
Table of Contents
