Recording - JVC KA-DV350U Instructions Manual

Using the CF
(Compact Flash)
Recording video on a DV cassette tape and CF card
Memo Memo
"NO CF FORMAT!" will appear if
t h e i n s e r t e d C F c a r d i s n o t REC START/STOP button
formatted. Format the card in the
POWER
MOVIE CLIP SET menu screen.
switch
☞
( page 46)
MODE
switch
<GY-DV300 rear panel>
1.
LCD screen
Turn on the GY-DV300 power.
Check to see that the
viewfinder screen. (When the power is turned on,
C F
will flash during initialization.)
2.
Insert a recordable DV cassette tape.
3.
Set the MODE switch to "CAM-A" or "CAM-B".
C F : Red display during
4.

recording

Set the NETWORK PACK CONFIG menu screen.
: Initializing
• Set MPEG REC to "TRIG".
• Set the video/audio compression in the ENCODE SETUP
NETWORK PACK CONFIG
• When completed with settings, press the MENU button to
menu screen
N E TW OR K P A CK C ON F I G
5.
M A I N
NE T WOR K S E T U P . .
Press the REC START/STOP button on GY-DV300 to start re-
EN CODE S E T U P . .
MPE G R EC TR G I
cording on the DV cassette tape as well as video/audio stream-
MOV I E CL I P S E T U P . .
MENU R E S E T CA NCE L
ing data on the CF card.
PAGE B ACK
( WMP u n d r 8 ) ( C F V i e w e r ) e
• During CF card recording,
• To stop recording, press the REC START/STOP button.
Set to TRIG • To resume recording, press the REC START/STOP button
ENCODE SET menu
screen
6.
To end recording, press the REC START/STOP button.
Card
Handle
POWER
OFF ON
MODE
CAM-B
CAM-A VTR
GAIN SHUTTER
BAR
REC START/STOP button
display appears on the LCD screen/
C F
display
menu screen. ( ☞ page 18)
return to the normal screen.
C F display will light red.
once more.
OVER
Using the CF
Recording
Recording video on a DV cassette tape and CF card (cont)
Caution
Before turning off the power,
check to make sure the
indicator on the LCD screen is
white.
Turning the power off when the
C F indicator is red will damage
the recorded clip file.
48
Card
(Compact Flash)
C F
Memo Memo
LCD screen
• When the DV cassette tape has reached the end during recording, CF
card recording will also stop.
C F
• When recording to a CF Card while in the TRIG mode, clip list (CSV file)
will be created for viewing using the CFViewer.
The CSV file name will be the value of the user's bit (UB) set in GY-DV300.
CFViewer will not function properly when there are frequent changes in
the UB value (when using UB as the time code). For details concerning
UB, please refer to the operator's manual of GY-DV300.
• Video recorded on a CF Card will start slightly slower than that recorded
CF card remaining on tape.
warning
• The CF card remaining warning is displayed on the LCD screen/viewfinder
☞
screen. ( page 9)
• If recording into the CF card is carried out within 5 seconds, either a file
cannot be made or it becomes difficult to display a thumbnail (a still picture
displayed when CLIP FILE is selected).
• Do not switch over the CAM/VTR mode during recording into the CF card.
If the mode is switched over during recording, the display of the LCD
viewer can go wrong once in a while. Also, if the mode is switched over
immediately after the start of recording into the CF card, some black
images can be mixed into a recorded picture.
Recording
49