JVC KA-DV350U Instructions Manual page 14

LCD and Viewfinder Display
<Operation related>
Screen display Cause
NO CF CARD! There is no CF card inserted.
(Flashing for 3 sec.)
PROTECT! Deletion of a protected clip file
(Flashing for 3 sec.) was attempted.
NO CLIP! There is no CF card inserted, of
(Flashing for 3 sec.) there is no clip file available.
SET WLAN AD HOC MODE OFF! U s e o f D H C P s e r v e r w a s
(Flashing for 3 sec.) attempted while in the AD HOC
mode. It is displayed also when
the LEAP mode is set to ON on the
NETWORK MAIN menu.
SET DHCP OFF! Selection of AD HOC mode was
(Flashing for 3 sec.) attempted while using DHCP
server.
OVERLAP HTTP! Port set for HTTP of WEB Browser
(Flashing for 3 sec.) is already in use.
OVERLAP ASF-HTTP! Port set for HTTP of Media Player
(Flashing for 3 sec.) is already in use.
OVERLAP ASF-RTSP! Set port for RTSP of Streamproducer
(Flashing for 3 sec) is already in use by another port.
OVERLAP QT-RTSP! Set port for RTSP of Quick Time is
(Flashing for 3 sec) already in use by another port.
ILLEGAL SETTING! Set value exceeded setting range.
(Flashing for 3 sec.)
DATA LENGTH 10 or 26 Setting made with other than 10 or
(Flashing for 3 sec) 26 characters.
CHRACTER IS SHORT!! Set number of characters is 2 or
(Flashing for 3 sec) less / 3 or less.
SET LEAP MODE OFF!! ADHOC mode use is attempted
(Flashing for 3 sec) when the LEAP mode is set to ON.
SAME OLD PASSWORD NAME!! The new password is the same as
(Flashing for 3 sec) the old password.
WRONG PASSWORD!! Wrong password is input.
GARBAGE! (Flashing display Optimization of internal ROM disk
while optimizing) currently being processed.
Remedy
Reference page
Insert a CF card. 45
To delete the clip file, remove the 55
protection.
Check the CF card.
—
Set DHCP in the NETWORK SET
14
menu screen to OFF when using
the AD HOC mode.
Set WLAN AD MOC MODE in the
16
NETWORK SET menu screen to
OFF when using DHCP server.
Set an unused port.
15
Set an unused port.
15
Set an unused port. 15
Set an unused port. 15
Set a value within the setting range. 14
Set using 10 or 26 characters. 17
Set using 3 or more / 4 or more 14
characters. 17
Set LEAP to OFF when in the
16
ADHOC mode.
Set a password different from the
17
old password.
Input a correct password.
27
Please wait until process is —
completed.
OVER
10
LCD and Viewfinder Display
<Operation related>
Screen display Cause
IP ADDRESS ERROR! Failed to acquire IP address when
(Flashing display until network DHCP is ON.
connection is established)
NO UPDATE FILES! There is no update data in the CF
(Flashing for 3 sec.) card.
NO UPDATE CARD! CF card is not inserted.
(Flashing for 3 sec.)
UPDATE FAILED! Update was not successful.
COPY GUARD! Signal of recording origin is
protected with copy guard.
SETTING FAILED! Input settng is wrong.
Remedy
Reference page
Set DHCP again. 14
Insert a CF card with UPDATE data —
into the slot.
Insert a CF card with UPDATE data —
into the slot.
Contact your JVC dealer. —
Input recording signal with no copy
—
guard protection.
Check the setting again.
—
11