File Playback; Selecting Files - JVC KA-DV350U Instructions Manual

The following trigger modes are supported:
TRIG – In this mode, you can record to the DV tape in the streamcorder and the PC (running
Streamproducer) simultaneously, and both recordings are controlled by the streamcorder's REC
buttons. In this mode, it is necessary to have a recordable tape in the streamcorder.
The "NO TAPE" warning appears on the streamcorder's viewfinder/LCD screen if no tape loaded.
To start recording;
Push the button on the streamcorder.
In case of GY-DV300 : [REC START/STOP] button
In case of GY-DV5000 : [VTR Trigger] button
In case of BR-DV6000 : [REC] button + [PLAY] button
(See the streamcorder's instructions for details about the buttons.)
The e sign turns red on the display of streamcorder indicating that you
are recording.
To stop recording;
Push the button on the streamcorder again during the e sign is red.
In case of GY-DV300 : [REC START/STOP] button
In case of GY-DV5000 : [VTR Trigger] button
In case of BR-DV6000 : [STOP] button
(See the streamcorder's instructions for details about the buttons.)
SPLIT – In this mode, you can record on the DV tape and/or the PC (running Streamproducer)
independently. It is not necessary to have a recordable tape in the streamcorder.
To start recording;
Push the button on the streamcorder.
In case of GY-DV300 : [SELECT] dial
In case of GY-DV5000 : [VTR Trigger] button beside of the
streamcorder's POWER switch.
In case of BR-DV6000 : [SET] button
(See the streamcorder's instructions for details about the buttons.)
The e sign turns red on the display of streamcorder indicating that
you are recording.
To stop recording;
Push the button on the streamcorder again during the e sign is red.
In case of GY-DV300 : [SELECT] dial
In case of GY-DV5000 : [VTR Trigger] button beside of the streamcorder's POWER switch.
In case of BR-DV6000 : [SET] button
(See the streamcorder's instructions for details about the buttons.)
OFF – Trigger mode is disabled, and the streamcorder and Streamproducer work independently, the
streamcorder record button controls recording to tape, and the Streamproducer 'Capture' button
controls PC capturing.
* This figure shows a GY-DV300.
For details of other models, please
see their respective instructions.
* This figure shows a GY-DV300.
For details of other models, please
see their respective instructions.
15

4.3 File Playback

Streamproducer can playback movie clip files saved on the hard disk or CompactFlash (CF) memory card, up
to four files simultaneously, each is shown on its own video display window. In addition, you can cast (stream)
from any one of these files, and even switch between them.
4.3.1 Selecting files..
To open a file in any view window not already allocated ("No setting" is shown in title bar).
Click the [Open] button on the video display window to open a file. The 'Open a movie file' dialog
appears.
Select a file and click [Open] button.
When the file is selected, the file name and image size are shown above the video display window as
are the operation buttons.
File name and
image size
You can see additional information about the selected file by choosing [Property...] from the [Menu]
pull-down.
Operation buttons
16