Controlling A Camera From A Pc; Controlling The Gy-Dv300; Adjusting The Gy-Dv300 Camera - JVC KA-DV350U Instructions Manual

Controlling a Camera from a PC

1.
SYSTEM [2/2] menu screen
Set NET REMOTE in the SYSTEM [2/2] menu screen to
ON.
S Y S T E M 2 / 2 ] [
FADE R O F F
2.
T A L L Y ON Set the MODE switch of the GY-DV300.
HANDL E ZO OM M ED I U M
DA T E R E C BAR S+ C A M
• VTR control icon operations by MODE switch settings of
ASP E C T 4 : 3
N E T R E MOT E ON
V F + L CD O F F
S E T UP O N
PAGE B ACK
GY-DV300 state
MODE switch
VTR
CAM-A or
CAM-B
Memo Memo
3.
In the web control window (Streamcorder) of the PC,
• During camera control and VTR
control, noise may be heard from click on [CAM&VTR CONTROL].
the speakers. However, this is not
• VTR control icon operations by MODE switch settings of
a malfunction. If the noise be-
comes irritating, open the "Sound
& Multimedia" property from the
Windows Control Panel and set the
sound of "Windows Explorer Start
Naviga-tion" of "Sound Events" to
off.
* For setting details, see Windows'
Help.
• Depending on the cache setting of
your web browser, the parameters
updated in the camera's menu may
not be effective immediately.

Controlling the GY-DV300

POWER switch
POWER
MODE
OFF ON
switch
MODE
MENU CAM-B
CAM-A VTR
button
GAIN
SHUTTER
BAR
MENU
AW SELECT
Tdial
FWD
REV
<GY-DV300 rear panel>
GY-DV300 are as follows.
− : Mode will not change
Clocking VTR control icon
Previous mode REC REW STOP FF PLAY PAUSE/STILL
− − −
STOP REW FF PLAY
FF − REW STOP − PLAY −
REW − − STOP FF PLAY −
PLAY − REV SEARCH STOP FWD SEARCH − STILL
STILL − REV SEARCH STOP FWD SEARCH PLAY PLAY
FWD SEARCH − REV SEARCH STOP − PLAY −
REV SEARCH − − STOP FWD SEARCH PLAY −
STOP REC REW − FF − −
REC − − STOP − − STBY
STBY REC − STOP − − REC
GY-DV300 are as follows:
Click
Click
Controlling a Camera from a PC
1.
Item
AUTO
Memo Memo
BARS
• When setting
AUTO to ON,
i t e m s o t h e r
WHITE BAL
than AUTO,
B A R S a n d
ZOOM will not
be available.
IRIS
• When setting
BARS to ON,
i t e m s o t h e r
t h a n B A R S
w i l l n o t b e
available.
GAIN
• When setting
GAIN to ALC,
I R I S a n d
SHUTTER will
not be avail-
able.
SHUTTER
ZOOM
62
In the web control window (Streamcorder) of the PC,
click on [CAM&VTR CONTROL].
• Now set the displayed items.
Click
Adjustment mode Setting/description
ON Auto mode on. Items other than LOLUX cannot be set.
OFF Auto mode off.
ON Color bar signals are outputted. Items other than
OFF AUTO and LOLUX cannot be set.
Color bar signals are not outputted.
FAW Full automatic white balance mode.
PRESET White balance will be in the preset state. (3200K)
MEMORY White balance setting stored in the GY-DV300 memory
1 to 3 will be used.
AUTO Auto iris mode. Iris will be adjusted within the following
range:
[–3, –2, –1, 0, +1, +2, +3]
MANUAL Manual iris mode. Iris will be adjusted within the
following range:
[CLOSE, F16, F11, F8, F5.6, F4, F2.8, F2, OPEN]
LOLUX Lolux mode
ALC ALC (Auto Level Control) mode. IRIS and SHUTTER cannot be set
STEP Gain can be set within the following range. 0dB is not available.
[–3dB to 18dB]
0dB Set the GAIN to 0 db. (No intensification should be carried out.)
STEP Shutter speed can be set within the following range:
U model: [1/100, 1/250, 1/500, 1/1000, 1/2000]
E model: [1/120, 1/250, 1/500, 1/1000, 1/2000]
OFF Shutter speed will be 1/60 (1/50). ( ): for E model
WIDE Zoom is set to WIDE. The zoom will move from the
current position to WIDE in the following rate. Press the
< button to shift in small step increments and << button
to shift in big step increments.
[1 to 14]
TELEPHOTE Zoom is set to TELEPHOTE. The zoom will move from
the current position to TELE in the following rate. Press
the > button to shift small step increments and >>
button to shift in big step increments.
[1 to 14]
Adjusting the
GY-DV300 camera
Setting
Select the
setting from
the pull-down
menu.
A d j u s t m e n t
mode selection
Check the de-
s i r e d a d j u s t -
ment mode.
Clicking the OK
button will con-
firm the inputted
setting.
63