Controls, Connectors And Indicators; How To Attach - JVC KA-DV350U Instructions Manual

Controls, Connectors and Indicators

Camera connection terminal
To connect the DV
camcorder (GY-DV300).
☞
( See page 9 "How to
Attach")
PC card slot
To insert a LAN card,
Compact Flash card, etc.
Access lamp
This lamp lights when the
card is in use.
Guard
Guard to prevent the card
from being inadvertently
ejected.
8
Service terminal.
Do not use this terminal.
Camera mounting screw holes
( 1 /4 inch)
To mount the KA-DV350 and
the GY -DV300 on a camera
tripod.
Release button
Press this button to remove
the KA-DV350 from the GY-
DV300.

How to Attach

1.
Cover
2.
Release button
3.
Be sure to turn OFF the power of
the GY-DV300 and open the
"cover" at the lower part of the
camera before attaching the KA-
DV350 using the following pro-
cedure.
1.
Hook the claw at the rear of
the KA-DV350 onto the notch
of the GY-DV300.
2.
While pressing the Release
button, press the claw at the
front of the KA-DV350 into the
notch of the GY-DV300.
3.
Attempt to move the KA-
DV350 back and forth to en-
sure that it is securely at-
tached to the camcorder.
Memo Memo
To detach, perform steps 2. and 1. in
order while pressing the Release
button.
9