For digital video camera gr-dvp1, gr-dvp3 (11 pages)
Summary of Contents for JVC ViewFinder VF-HP840U
VIEWFINDER VF-HP840U Thank you for purchasing this JVC product. Before beginning to operate this unit, please read the instructions carefully to ensure the best possible performance. For Customer Use: Enter below the Serial No. which is located on the body.
Getting Started FOR USA These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. Read all of these instructions. Save these instructions for later use. All warnings on the product and in the operating instructions should be adhered to. Unplug this appliance system from the wall outlet before cleaning.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION: CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER fS AUTHORITY TO OPERATE THE EQUIPMENT. NOTE: The rating plate (serial number plate) is on this unit.
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH Company name changed in: JVC Technical Services Europe GmbH...
Getting Started Precautions During Use Location of Storage and Use Do not place this product at the following locations. Doing so may cause the product to malfunction or break down. ● Hot or cold places beyond the allowable operating temperature range of 0°C to +40°C. ●...
● The above feature may not function depending on the version of the camera’s software. For details, please consult JVC’s authorized dealers. [1 : 1] Button Press this button to display the input video signals 1: 1 without resizing.
[CAMERA NAME] will be AOFFB. ● The above feature may not function depending on the version of the camera’s software. For details, please consult JVC’s authorized dealers. [VF CABLE] Input Terminal Connect this terminal to the KA-HD250U VF output terminal (20-pin) with the provided VF cable.
Release button ● Use KA-HD250U with identification letter from (A) onwards on the name plate for connecting to this unit. If there is no identification letter, consult JVC dealer. VF Cable Insert the provided VF cable completely into the [VF CABLE] terminal.
Setup Installation (continued) Mounting hood cover (provided) Align the hood cover with the groove on top of the viewfinder screen and insert from the top. Secure with the screw found under the center of the viewfinder screen. Screw Adjusting position To adjust the angle of the viewfinder, loosen the Pan/ Tilt Lock Handle and secure it at an appropriate angle for visible viewing.
Video display, 1:1 display and when status display is OFF. ● The above feature may not function depending on the version of the camera's software. For details, please consult JVC's authorized dealers. This item sets the display percentage for markers inside the aspect area.
Menu Menu screen content (continued) SHOOTING ASSIST Menu Screen Settings in bold are factory default settings. Item Setting Value FOCUS ASSIST GREEN BLUE LEVEL MIDDLE HIGH ZEBRA OVER 1PATTERN 2PATTERNS TOP1 5 % ~ 80 % ~ 100 % OVER BOTTOM1 0 % ~ 70 % ~ 100 % This item sets the lower limit of the brightness of Zebra 1.
Note ： ● The above feature may not function depending on the version of the camera’s software. For details, please consult JVC’s authorized dealers. This item sets the frame rate of the input signals. 60: Select this when the frame rate of the input signals is 60 Hz.
Setting Value VF SIGNAL COMPONENT TALLY SYSTEM STUDIO Other than STUDIO *1 The above feature may not function depending on the version of the camera’s software. For details, please consult JVC’s authorized dealers. Terminal Specifications VF Terminal 20-pin Connector Pin No.
Setting Selection DIP Switch You can switch the setting (factory setting) for certain functions. All DIP switches are set to "OFF" in the factory settings. Method of opening Remove the two screws fastening the cover on the bottom of this product and open the cover. Caution ：...
Others Specifications General Connected Target Equipment : KA-HD250U Power Supply : 12 V DC (11 V DC to Power Consumption : Approx. 13 W and below Ambient Temperature : 0 °C to 40 °C Allowable Operating Humidity : 30 % RH to 80 % RH Mass : 1.6 kg (excluding hood) Dimension...
Dimensional Outline Drawing (Unit: mm) The specifications and appearance of this product and other related products may be modified for improvement without prior notice. With Hood MENU STATUS BRIGHT CONTRAST PEAKING FOCUS ASSIST Without Hood...