Canon imagePROGRAF iPF710 Manual page 13

4
Insert the Holder Stopper from the right in the Roll Holder as shown. Holding it
at the position indicated (b), push it firmly in until the flange (a) of the Holder
Stopper touches the roll. Lock the Holder Stopper lever (c) by pushing it down
toward the shaft side.
Important
•
Insert the Holder Stopper firmly onto the roll. Failure to do this may cause feeding
problems.
Note
•
Remove any loaded paper that will not be used.
•
If th e Platen is dirty, clean inside the To p C o v e r . (→ P.38)
13
Loading a Roll