Canon imagePROGRAF iPF710 Manual page 50

Responding to Messages
Error Messages
Use another paper.
This paper cannot be used.
Borderless printng not
possible.
Cause
The Printhead and feed
amount cannot be adjusted
when highly transparent film is
loaded.
The loaded paper is too large
for the printer.
The loaded paper is too small
for the printer.
Paper has been loaded
that is too small to print the
test pattern for printhead
adjustment or nozzle checking.
The paper is loaded askew.
The paper loaded is not
compatible with borderless
printing.
Because paper expands or
contracts depending on the
environment of use, it may
become narrower or wider
than the supported width for
borderless printing.
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
50
Corrective Action
We recommend using a type of
paper that you often use, other than
film, for Printhead adjustment.
(→P.45)
Adjust the feed amount manually.
(→"Adjusting the Feed Amount
Manually," User Manual)
Load paper of the correct size.
(→"Paper Sizes," User Manual)
Load paper of the correct size.
(→"Paper Sizes," User Manual)
Load unused paper A4/Letter-sized
or larger. More than one sheet
may be required depending on the
adjustment.
Press the Load/Eject button and
reload the paper.
Insert the roll firmly until it touches
the flange of the Roll Holder.
(→P.11)
If you press the Online button and
continue printing, the document will
be printed with a border.
Load paper compatible with
borderless printing and try printing
again. Paper you can use for
borderless printing is restricted to
particular types of paper and rolls
of particular widths. For information
on types of paper compatible with
borderless printing, refer to the
Paper Reference Guide.
(→"Types of Paper," User Manual)
Use each type of paper only where
the recommended environmental
conditions are met. For details on
environmental conditions for various
paper, see the Paper Reference
Guide.
(→"Types of Paper," User Manual)
Follow these steps to change the
settings of the print job to enable
borderless printing.
1.
Hold down the Stop button for a
second or more to cancel printing.
2. Make sure the correct printer driver
for the printer is selected and try
printing again.
For information on types of paper
compatible with borderless printing,
refer to the Paper Reference
Guide.
(→"Types of Paper," User Manual)
If you press the Online button and
continue printing, the document will
be printed with a border.