Canon imagePROGRAF iPF710 Manual page 52

Responding to Messages
Error Messages
Papr Size Mismatch
Paper size not detected.
Cause
The paper size as specified
on the printer does not match
the size specified in the printer
driver.
Paper has been loaded askew,
or warped paper has been
loaded.
52
Corrective Action
Adjust the paper size setting in
the printer driver to match the size
loaded in the printer as follows.
・
Hold down the Stop button for a
second or more to cancel printing.
・
Change the paper size setting in
the printer driver to the size loaded
in the printer and try printing again.
Replace the loaded paper with
paper of a size that matches the size
setting in the printer driver as follows.
1. Hold down the Stop button for a
second or more to cancel printing.
2. Replace the loaded paper to match
the paper size setting in the printer
driver and try printing again.
Press the Online button to resume
printing.
However, this may cause a paper
jam or printing problem.
Reload paper straight, in the correct
position.
(→P.11)
(→P.18)