Canon imagePROGRAF iPF710 Manual page 39

Important
•
If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is
cut. We recommend cleaning the Ejection Guide even if it does not appear dirty,
because it may actually be covered with paper dust.
4
Plug the power cord into the outlet.
Cleaning Inside the Top Cover
Clean inside the Top Cover about once a month to maintain better printing quality and
help prevent problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
•
If the printed surface or the underside of paper is dirty after printing
•
After you have used up a roll
•
After borderless printing
•
After printing on small paper
•
After printing on paper that generates a lot of cutting debris
•
If you have replaced the roll
•
After printing on paper that generates a lot of paper dust
Important
•
If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper.
We recommend always cleaning the Platen after borderless printing or printing on
small paper.
•
If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is
cut. We recommend cleaning the Ejection Guide even if it does not appear dirty,
because it may actually be covered with paper dust.
39
Cleaning the Printer