Using The Dvd Multi Playback Mode - JVC RX-80PGD Instructions Manual

Using the DVD MULTI Playback Mode

Speaker arrangements for DVD MULTI playback
When you play back a disc on the DVD player with its analog discrete output mode selected:
Left front
speaker
Left rear
speaker
Activating the DVD MULTI playback
DVD MULTI
DAP/SURROUND/DVD MULTI
ADJUST
Front panel
Page 29
This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of
the DVD player.
Before playing back a DVD, refer also to the manual supplied with the DVD player.
The following illustrations show how to obtain the optimum sound environment for the DVD MULTI
playback mode. Try to find the speaker direction and location to create the optimum sound field.
Sub-
TV
woofer
Center speaker
You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output
mode on the DVD player.
Once you made adjustments, the receiver memorizes the adjustments until you change them. You also need
to set the DVD player to the analog discrete output mode.
Note:
When you select "DVDMULTI" as the source to play, the DAP and surround modes are canceled
temporarily.
On the front panel:
1. Press DVD MULTI so that "DVDMULTI" appears on the display.
The lamp above the button and the DVD lamp (of the source lamps) light up.
2. Select the analog discrete output mode on the DVD player, and start playing a DVD.
Refer to the manual supplied with the DVD player.
If you want to make any adjustment, go to the following steps.
3. Press DAP/SURROUND/DVD MULTI ADJUST so that the Control % / fi / @ / # buttons
work for adjusting the DVD MULTI playback mode.
The lamp next to the button lights up.
4. Press Control % / fi until "–CENTER+" appears on the display.
MENU
Right front
speaker
Right rear
Note:
speaker
You can place the subwoofer
anywhere around you.
See also
page 39.