JVC RX-80PGD Instructions Manual page 33

5. Press Control @ / # to adjust the center speaker output level.
6. Press Control % / fi until "–REAR L+" appears on the display.
7. Press Control @ / # to adjust the left rear speaker output level.
8. Press Control % / fi until "–REAR R+" appears on the display.
9. Press Control @ / # to adjust the right rear speaker output level.
10. Press Control % / fi until "CNT TONE" (Center Tone) appears on the display.
11. Press Control @ / # to select the center tone you want.
Front panel
From the remote control:
Note:
If you want to use the remote control for adjusting the center tone, use the menu function (see page 39).
DVD
1. Press DVD MULTI so that "DVDMULTI" appears on the display.
MULTI
2. Select the analog discrete output mode on the DVD player, and start playing a DVD.
If you want to make any adjustment, go to the following steps.
3. Set the remote control mode selector to the "SOUND CONTROL" position.
TV / VCR / TUNER
/ CD / DVD / VCD
SOUND
4. Press CNTR +/– to adjust the center speaker output level.
CONTROL
CNTR
2 3
5. Press REAR•(L) +/– to adjust the left rear speaker output level.
ENTER REAR (L)
5 6
6. Press (REAR•R) +/– to adjust the right rear speaker output level.
(REAR R)
8 9
Remote Control
• Pressing Control @ decreases the output level up to –10 dB.
• Pressing Control # increases the output level up to +10 dB.
• Pressing Control @ decreases the output level up to –10 dB.
• Pressing Control # increases the output level up to +10 dB.
• Pressing Control @ decreases the output level up to –10 dB.
• Pressing Control # increases the output level up to +10 dB.
The center tone adjustment affects the mid-frequency range, which the human voice is mostly made
up of.
Each time you press the button, the display changes to show the following:
SOFT2 SOFT1
To make the dialogue clearer, select "SHARP1" (little) or "SHARP2" (much).
To make the dialogue softer, select "SOFT1" (little) or "SOFT2" (much).
When "FLAT" is selected, no adjustment is applied.
The DVD MULTI lamp lights up and the DVD lamp (of the source lamps) lights up.
Refer to the manual supplied with the DVD player.
10 keys are activated for adjusting the sounds.
• Pressing CNTR – decreases the output level up to –10 dB.
• Pressing CNTR + increases the output level up to +10 dB.
• Pressing REAR•(L) – decreases the output level up to –10 dB.
• Pressing REAR•(L) + increases the output level up to +10 dB.
• Pressing (REAR•R) – decreases the output level up to –10 dB.
• Pressing (REAR•R) + increases the output level up to +10 dB.
FLAT SHARP1 SHARP2
Page 30