Creating Your Own Sea Mode - JVC RX-80PGD Instructions Manual

Creating Your Own SEA Mode

SEA
MEMORY
ADJUST
SEA
MEMORY
ADJUST
Front panel
Page 25
You can adjust and store your own SEA adjustment into memory (USERMODE).
On the front panel only:
If you do not want to store your adjustment, but rather want to adjust the SEA temporarily, skip step 3 below.
1. Press SEA ADJUST so that the Control % / fi / @ / # buttons work for the SEA adjustment.
The lamp next to the button lights up.
2. Adjust the SEA frequency and its level.
• Press Control @ / # to select the frequency range to adjust.
• Press Control % / fi to adjust the level.
100 1k
3. Press MEMORY (next to the SEA ADJUST button).
Your adjustment is stored into USERMODE.
To recall your own SEA adjustment
See page 24.
To erase a stored adjustment
Storing a new adjustment into USERMODE erases the previously stored one.
10k
See also
page 39.
MENU