Table of Contents
Advertisement
Using the SEA Modes
Selecting Your Favorite SEA Mode
SEA MODE
Front panel
TV / VCR / TUNER
/ CD / DVD / VCD
SOUND
CONTROL
SEA MODE
10
RETURN
Remote Control
The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds.
Note:
The SEA modes cannot be used for recording.
On the front panel:
1. Press SEA MODE so that the Control % / fi buttons work for selecting the SEA mode.
The lamp next to the button lights up.
2. Press Control % / fi until the mode you want appears on the display.
Each time you press the button, the SEA mode changes as follows:
ROCK
SEA OFF
Note:
When the SEA mode is turned on, the SEA indicator lights up on the display.
ROCK:
Gives a heavy sound. Both high and low frequencies are boosted.
MUSICAL:
Enhance the mid-frequency range, which the human voice is mostly made up of.
MOVIE:
Adds breadth to sounds so you feel like you are in a movie theater.
COUNTRY:
Enhances the high-frequency range so that instruments such the violin and banjo
are emphasized.
JAZZ:
Gives a feeling of a live atmosphere. Good for acoustic music.
USERMODE:
Your original SEA adjustment (see page 25).
SEA OFF:
No SEA mode is applied (see below).
To cancel the SEA mode, press Control % / fi until "SEA OFF" appears in step 2 above.
The SEA indicator goes off from the display.
From the remote control:
1. Set the remote control mode selector to the "SOUND CONTROL" position.
10 keys are activated for adjusting the sounds.
2. Press the SEA MODE button repeatedly until the SEA mode you want appears on the display.
Each time you press the button, the SEA mode changes as follows:
ROCK
MUSICAL
SEA OFF
Note:
When the SEA mode is turned on, the SEA indicator lights up on the display.
To cancel the SEA mode, press SEA MODE until "SEA OFF" appears in step 2 above.
The SEA indicator goes off from the display.
MUSICAL
MOVIE
USERMODE
MOVIE
COUNTRY
USERMODE
JAZZ
See also
page 39.
MENU
COUNTRY
JAZZ
Page 24
Advertisement
Table of Contents
