Receiving Radio Broadcasts
Tuning in Stations Manually
TUNER
MEMORY
Front panel
You can browse through all the stations or use the preset function to go immediately to a particular station.
On the front panel only:
1. Press TUNER so that the Control % / fi / @ / # buttons work for tuner settings.
The lamp next to the button lights up.
2. Press Control % / fi until "<FM AM>" appears on the display.
3. Press Control @ / # to select the band.
Each time you press the button, the band alternates between FM and AM.
4. Press Control % / fi until "–TUNING+" appears on the display.
5. Press Control @ / # until you find the frequency you want.
• Pressing Control @ decreases the frequency.
• Pressing Control # increases the frequency.
Notes:
• When you hold down Control @ / # in step 5, the frequency keeps changing until you press the button again
or a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator also lights up.
See also
page 39.
MENU
Page 20