Using The Sleep Timer - JVC RX-80PGD Instructions Manual

Using the Sleep Timer

SETTING
Front panel
Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off by itself rather than
play all night.
On the front panel only:
1. Press SETTING so that the Control % / fi / @ / # buttons work for setting the Sleep Timer
The lamp next to the button lights up.
2. Press Control % / fi until "<SLEEP>" appears on the display.
3. Press Control @ / # to set the shut-off time.
Each time you press the button, the shut-off time on the display changes as follows:
The SLEEP indicator lights up on the display.
10 20
When the shut-off time comes
The receiver turns off automatically.
To check or change the time remaining until the shut-off time
1. Press SETTING, if necessary, so that the Control % / fi / @ / # buttons work for setting the
Sleep Timer.
2. Press Control % / fi, if necessary, until "<SLEEP>" appears on the display.
3. Press Control @ / # once.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press Control @ / # repeatedly.
To cancel the Sleep Timer
Press Control @ / # repeatedly in step 3 above until "0" appears on the display. (The SLEEP indicator goes
off.) Turning off the power also cancels the Sleep Timer.
30 40 50
0 (Canceled)
See also
page 38.
MENU
60 70 80
Page 16