Table of Contents
Advertisement
Maintenance
• Always clean the instrument before returning it to the case. The lens requires
special care. First, dust it off with the lens brush to remove tiny particles. Then,
after providing a little condensation by breathing on the lens, wipe it with the
wiping cloth.
• If the display unit is dirty, carefully wipe it with a soft, dry cloth. To clean other
parts of the instrument or the carrying case, lightly moisten a soft cloth in a mild
detergent solution. Wring out excess water until the cloth is slightly damp, then
carefully wipe the surface of the unit. Do not use any alkaline cleaning solutions,
alcohol, or any other organic solvents, on the instrument or display unit.
• Store the CX in a dry room where the temperature remains fairly constant.
• Check the tripod for loose fit and loose screws.
• If any trouble is found on the rotatable portion, screws or optical parts (e.g.
lens), contact your local dealer.
• When the instrument is not used for a long time, check it at least once every 3
months.
"33. CHECKS AND ADJUSTMENTS"
• When removing the CX from the carrying case, never pull it out by force. The
empty carrying case should be closed to protect it from moisture.
• Check the CX for proper adjustment periodically to maintain the instrument
accuracy.
Exporting this product (Relating EAR)
• This product is equipped with the parts/units, and contains software/technology,
which are subject to the EAR (Export Administration Regulations). Depending
on countries you wish to export or bring the product to, a US export license may
be required. In such a case, it is your responsibility to obtain the license. The
countries requiring the license as of May 2013 are shown below. Please consult
the Export Administration Regulations as they are subject to change.
North Korea
Iran
Syria
Sudan
Cuba
URL for the EAR of the US: http://www.bis.doc.gov/policiesandregulations/ear/
index.htm
2. PRECAUTIONS
7
Advertisement
Table of Contents
