Table of Contents
Advertisement
11. DISTANCE MEASUREMENT
• Press [HT] to enter an
instrument height (HI) and a
target height (HR).
• When [REC] is pressed, REM
data is saved.
"27. RECORDING DATA -
TOPO MENU -"
• Press [HT/Z] on the second
page of the REM measurement
to display the Z coordinate for
the height from the ground to the
target. Pressing [HT/Z] again
returns to the height display.
7. Press {ESC} to finish
measurement and return to the
OBS mode screen.
• It is also possible to perform REM measurement by pressing [REM] when
allocated to the OBS mode screen.
"31.3 Allocating Key Functions"
• Inputting instrument and target height: Press [HT] to set instrument and target
height. It can be set also in "Occ. Orientation" of coordinate measurement.
"12.1 Entering Instrument Station Data and Azimuth Angle"
46
Height
HI
HR
0.000m
0.000m
OK
Advertisement
Table of Contents
