Table of Contents
Advertisement
2. Sight the 1st target and press
[MEAS].
• If the distance measurement
data remains, the last measured
distance data is set as the
starting point, and the screen in
step 3 is displayed.
• The tilt screen is displayed if the
instrument is out of level.
Level the instrument.
"7.2 Levelling"
3. Sight the second target and press
[MLM] to begin observation.
• [REC]: records 1st target
measurement results.
The following values are
displayed:
SD: Slope distance of the starting
position and 2nd target.
HD: Horizontal distance of the
starting position and 2nd
position.
VD: Height difference of the
starting position and 2nd
target.
• Target height of the starting
position and 2nd target can be
input.
Press [Tgt.h] on the second
page.
Input the target heights and
press [OK].
• Press [COORD] to input
coordinates.
"PROCEDURE
Calculating from input
coordinates"
20. MISSING LINE MEASUREMENT
MLM
Set PT1
SD
ZA
80
HA-R
140
MOVE
MLM
Set PT2
SD
ZA
80
HA-R
140
MOVE
REC
MLM
SD
20.757m
HD
27.345m
VD
1.012m
MOVE
REC
MLM
SD
20.757m
HD
27.345m
VD
1.012m
COORD
Target height
P T 1
P T 2
42
15
42
15
MEAS
MLM
0.123m
42
15
42
15
MEAS
MLM
MEAS
MLM
P2
Tgt.h
S/%
1 . 5 0 0
m
1 . 5 0 0 m
OK
125
Advertisement
Table of Contents
