Sokkia CX-52 Operator's Manual page 230

30. OUTPUTTING JOB DATA
When "GTS (Obs)" or "SSS (Obs)"
is selected, select the output
format of distance data.
• Selecting "Obs data" outputs the
slope distance. Selecting
"Reduced data" outputs the
horizontal distance data
converted from the slope
distance. (When the SSS format
is selected, the height difference
is also output.)

• When the instrument station data is
not recorded during the
measurement, selecting "Reduced
data" may cause output of an
unintended measurement result.
8. Press {ENT} to start outputting
data in the current JOB. After
output is completed, the screen
returns to the list of JOBs, where
you can output data in other
JOBs.
• Press {ESC} to stop data output
in progress.
PROCEDURE Code output to a host computer

• Only the codes for communication formats compatible with "T type" can be
output.
• When outputting the code, it is necessary to select "T type" in the
communication setting.

"31.1 Configuration -Config Mode-" Communication Setup
1. Connect the CX and a host computer
in advance.
222
Obs data
Reduced data