Table of Contents
Advertisement
4. Sight the first point (P1) on the
plane and press [MEAS] to begin
measurement.
The measurement results are
displayed. Press [YES].
5. Sight the second point (P2) and
the third point (P3) on the plane
and press [MEAS].
The measurement results are
displayed. Press [YES] to define
the plane.
6. Accurately sight the direction of
the target point.
The distance and angle of the
target point are displayed.
• When [HVD] is pressed, display
mode is switched from
coordinates to SD, ZA, HA-R.
• To record the calculation result,
press [REC].
"27. RECORDING DATA -
TOPO MENU -"
Sight the next target point.
7. After finishing measurement,
press [OK] in the screen of step 6
to return to <Offset>.
19. OFFSET MEASUREMENT
M e a s u r e 1 s t p t
ZA
HA-R
Confirm?
M e a s u r e 3 r d p t
ZA
HA-R
Offset Plane
4th meas. OK ?
REC
HVD
C
MEAS
NO
YES
C
MEAS
OK
121
Advertisement
Table of Contents
