Table of Contents
Advertisement
6. Sight the 2nd target and press
[MEAS].
The measurement results are
displayed. Press [YES].
7. Enter the distance from the 2nd
target to the target point and press
{ENT}. The coordinates of the
target point are displayed.
8. Press [YES]. <Offset> is restored.
• When [HVD] is pressed, display
mode is switched from
coordinates to SD, ZA, HA-R.
19. OFFSET MEASUREMENT
Confirm?
NO
0 0 0
REC
HVD
NO
YES
YES
119
Advertisement
Table of Contents
