General Information
Speedometer
The speedometer indicates the road speed of
the motorcycle.
Tachometer
The tachometer shows the engine speed in
revolutions per minute - rpm (r/min). On the
right side of the tachometer face is the 'red
zone'. Engine rpm (r/min) in the red zone is
above maximum recommended engine
speed and is also above the range for best
performance.
Caution
Never allow engine rpm to enter the 'red
zone' as severe engine damage may result.
Odometer/Trip Meter
2
cfzs_1
1. Odometer/trip meter/clock display
2. Reset button
The odometer shows the total distance that
the motorcycle has travelled.
20
There are two trip meters. Either trip meter
shows the distance that the motorcycle has
travelled since the meter on display was last
reset to zero.
Do not attempt to switch between
odometer and trip meter display modes or
reset the trip meter with the motorcycle in
motion as this may lead to loss of
motorcycle control and an accident.
To switch between the odometer and trip
meter display modes, press and release the
reset button until the desired display is visible.
The display will scroll through in the order:
•
Odometer
•
Trip meter 1
•
Trip meter 2
•
Clock
Trip Meter Reset
To reset either of the trip meters, select and
display the trip meter to be zeroed then press
the
reset button
2 seconds, the trip meter on display will reset
to zero.
1
Warning
for
2 seconds.
After