Remove/Replace Membrane Switch And Display Assy - Prince Castle DCFT-MCD Series Service Manual

Vertical Toaster
DCFT-MCD Series

Remove/Replace Membrane Switch and Display Assy

Unplug the unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Remove compression knobs (2) from knob pins on
2
right side panel. Set knobs aside.
Remove screws (7) that secure right side panel to
3
frame. Set screws aside.
Lift right side panel off frame.
4
Disconnect electrical connectors (2) from clips on back
5
side of membrane switch.
Printed in USA 12/20 © 2020
WARNING
Straighten mounting tabs (4) that secure display panel
6
to panel.
Lift display panel off side panel.
7
Position new display panel onto mounting tabs (4) on
8
right panel.
Bend tabs to secure display panel to panel.
9
Connect display panel electrical connectors (2) to
10
corresponding clips on back side of membrane switch.
Note - connectors are keyed.
Position right side panel on frame and secure with
11
screws (7).
Insert compression adjust knobs onto knob pins.
12
22 527-504revM_EN