Table of Contents
Advertisement
Caution!!!
When installing the Starter Kill, it is extremely important that pin 86 be wired to Ignition: do not
jump it to pin 30 (damage to the vehicle could result).
Note: Installation of the Starter Kill system requires an external relay. (Not included!)
Passive or Active Arming
The Remote Car Starter can be set to:
•
Active Arming: the Starter Kill will not arm automatically. Press the
arm and the
•
Passive Arming: the Starter Kill will arm automatically if it is not armed by remote
within a 60-sec. delay. Press
•
Passive Arming with 3-minute timeout: the Starter Kill will arm automatically after
3 minutes.
Resetting the Remote Car Starter
The Remote Car Starter is equipped with a reset function that allows the installer to
erase all Transmitter codes from memory and return all the Programming Options to the
factory default values.
Resetting the Remote Car Starter is not a required process. Most of the time, you can
avoid resetting by fixing the issue directly at the root of the cause.
1. Flash the Hood Pin switch (see Table 1)
– Once inside Programming Mode, you have 10 seconds to complete the next step.
2. Press and release the Break Pedal 6 times (within 10 seconds from entering
Programming Mode).
3. The Parking Lights will flash 8 times to confirm resetting.
On some vehicles (such as BMW and certain Volkswagen vehicles), resetting will not
work if the Brake Pedal is pressed while the Ignition Key is not in the
position: you will need therefore to hot-wire the Brake Pedal by manually jumping 12 V
with a fused test lead at the Brake Pedal switch.
1. Flash the Hood Pin switch (see Table 1)
– Once inside Programming Mode, you have 10 seconds to complete the next step.
2. Press and release the Valet Button 6 times or more until the Parking Lights start to
flash.
3. The Parking Lights will flash 8 times to confirm resetting.
Events Logging
With this feature, the remote car starter will play back the last 4 start failure events codes
via the parking lights or L.E.D.
AS-2360TW Installation Guide
button to disarm it.
UNLOCK
UNLOCK
Table 12
Resetting without a Valet Button
Table 13
Resetting with the Valet Button
to disarm.
button to
LOCK
IGNITION ON (RUN)
P. 27
Advertisement
Table of Contents
