Leveling Information - U-Line UCDE215 User Manual & Service Manual

USER GUIDE
Connections
When complete, the connections should look like this:

LEVELING INFORMATION

1. Use a level to confirm the
unit is level. Level should
be placed along top edge
and side edge as shown.
2. If the unit is not level,
shim as needed.
3. Confirm the unit is level
after each adjustment
and repeat the previous
steps until the unit is
level.
General Installation
Infuser
Regulator
Keg
To comply with applicable federal, state,
and local codes, it may be necessary to
caulk the refrigerator to the floor.
CASTERS (optional)
1.
2.
3.
4.
When ready to use, see FIRST USE section in
this manual.
17
Filter
Assembly
CAUTION
!
Remove grille and back panel to access nuts.
Remove each nut and unscrew each leg.
Install each caster and secure with nut.
Tighten with included wrench.
Replace grille and back panel.
u-line.com