U-Line UCDE215 User Manual & Service Manual page 15

USER GUIDE
2. Attach gray coupler of the gas jumper line to keg.
With your thumb press down on the top of the coupler
while pulling up on collar. Press coupler down firmly
onto "in" valve. Release collar - listen for a click. Pull
up on the coupler to ensure it is locked down.
In Valve
3. Attach infuser hose to elbow connector on infuser
regulator.
Other end is
connected to
Tower
4. Attach other end of hose to the single connection
within the beverage tower.
Other end is
connected
to Infuser
Regulator
General Installation
Elbow
Connector
Connect keg to tower
1. Attach black nitrogen coupler of the liquid jumper line
to keg. With your thumb press down on the top of
the coupler while pulling up on collar. Press coupler
down firmly onto "out" valve. Release collar - listen
for a click. Pull up on the coupler to ensure it is locked
down.
Out Valve
2. Attach other end of beverage hose to "Y" connection
within dispenser tower - line up and press in firmly.
15
u-line.com
Other end is
connected to keg