USER GUIDE
Connections
When complete, the connections should look like this:
Tank
Regulator
Nitrogen Tank
LEVELING INFORMATION
1.
Use a level to confirm the
unit is level. Level should
be placed along top edge
and side edge as shown.
2.
If the unit is not level,
adjust the legs on the
corners of the unit as
necessary.
General Installation
Infuser
Regulator
Keg
Turn to Adjust
3.
Confirm the unit is level after each adjustment
and repeat the previous steps until the unit is
level.
When ready to use, see FIRST USE section in
this manual.
16
u-line.com
Filter
Assembly