Table of Contents
Advertisement
Figure 3-15: GUI Login
The home page is the Basic Setting > Basic Info menu, which reports the current eNB status
(Figure 3-16). In
section
3.5.7, you will use this page to confirm that the eNB is active.
Figure 3-16: Home Page
Optionally, you may want to:
1. Change the login password.
2. Confirm the firmware version is the latest available from Baicells website; upgrade if
needed. Firmware upgrades can be found at Baicells.com > Support > Firmware. See
Section 3.7.2
for detailed instructions regarding firmware upgrades.
3. Set the Network Timing Protocol (NTP).
For help, refer to the
CloudCore Configuration & Network Administration
26
Guide.
Advertisement
Table of Contents
