Weatherproofing; Figure 2-3: Weatherproofing; Figure 2-4: Weatherproofing Gps Antenna - Baicells Nova430e Installation Manual

Outdoor 4x250mw two-carrier tdd enodeb
Hide thumbs Also See for Nova430e:
Table of Contents

Advertisement

2.5 Weatherproofing

For Radio Frequency (RF) antenna weatherproofing, use cold shrink tubes.
To protect the connection points from weather and climate, clean each connection point before
installing cold shrink tubes, per the following (Figure 2-3).
1.
Insert the cable into the cold shrink tube.
2.
Tighten the connector.
3.
Push the cold shrink tube to the top joint, and pull out the strip.
4.
Ensure the cold shrink tube is tightly fitted with the connection.

Figure 2-3: Weatherproofing

For GPS antenna weatherproofing, use all-weather electrical tape and mastic tape, per the
following figure (Figure 2-4).

Figure 2-4: Weatherproofing GPS Antenna

NOTE: Make sure that the wrapping direction of the last layer is from the bottom up. The
last layer should be tight enough to keep it from cracking.
14

Advertisement

Table of Contents
loading

Table of Contents