Table of Contents
Advertisement
About This Document
This document is intended for personnel who will be installing the Baicells Nova430e Outdoor
4x250mW eNodeB (eNB) product. The product overview is followed by the procedures for properly
installing, performing basic configuration, and verifying the eNB is operational. Please be advised
that only personnel with the appropriate electrical skills and experience should install this device.
This document is based on software version BaiBS_QRTB_2.9.4. The Nova430e part number is
pBS3101SE.
Terms used in this document or related to Long Term Evolution (LTE) are listed in alphabetical order
and described in
Acronyms and
Documents.
Copyright Notice
Baicells Technologies, Inc., copyrights the information in this document. No part of this document
may be reproduced in any form or means without the prior written consent of Baicells Technologies,
Inc.
Disclaimer
The information in this document is subject to change at any time without notice. For more
information, please consult with a Baicells technical engineer or the support team. Refer to the
"Contact Us" section below.
Disposal of Electronic and Electrical Waste
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed
of with unsorted waste. Please contact your local recycling authority for disposal of this
product.
Revision Record
Date
Version
04-Mar-2022
1.01
Abbreviations, which can be found at Baicells.com > Resources >
Description
Initial release for QRTB 2.9.4
2
SMEs/Contributors
Warren Lai, Sonny May, Abel
Lamas
Author/Editor
Catherine Philley
Advertisement
Table of Contents
