Working With The Service Pc; Description Of The Syntax Used In These Instructions - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Appendix

Working with the service PC

Description of the syntax used in these instructions

< ..... >
CAPITALS
Italics
[ ..... ]
Bold
xx yy zz
{...}
NOTICE
∗ ∗ ∗ ∗ ∗
Menu Selection:
<ENTER>
<ESC>
<xx> + <y>
<F1>
<F10>
Siemens-Elema AB
Solna, Sweden
The indication of which function keys to press is given between
these characters, for example <ENTER>, <ESC> etc.
Capital letters indicate data which must be entered unchanged,
for example the name of a register, files etc.
Italics represent data in which a value should be entered, e.g. for
user name, the name of the technician should be entered.
Square brackets enclose additions to commands which may be
optionally entered.
Data relating to formats, user entries etc., which is important for
the following entry, is shown in bold as it appears on the monitor
screen.
This character indicates that at this point the space key must be
pressed.
Data can be entered in place of "x, y, z"
(e.g. day´s date).
Curved brackets indicate that out of several terms listed one be-
low the other, one must be selected.
Important remarks are indicated with this box.
When the password is entered, only these characters are shown.
When several menus, programs, files etc. are presented for selec-
tion, they are shown in a box (program window).
Selection is made with the <↓> and <↑> keys.
The module selected is highligthed in the display.
Every entry must be confirmed with the <ENTER> key.
ESC allows paging back through the program.
Some functions are selected by pressing two keys
simultaneously. Procedure: Press, for example, the <Shift> key
and keep it depressed, press the <∗> key and then release both
keys.
Key <F1> calls up a selective help text.
Key <F10> exits the program.
Register 3 SP B7-230.033.07
Rev. 03
Page 1 of 6
11.99 SPS-UD
20 - 1
20
20
20
Mammomat 1000/3000
Installation and Start-Up