Fitting The Mammomat Cap; Fitting The Cable Outlet Cover - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Final procedures

Fitting the Mammomat cap

Fig. 3 Mammomat cap
1.
2.

Fitting the cable outlet cover

1
Fig. 4 Cable-outlet cover
1.
Siemens-Elema AB
Solna, Sweden
2
Fit the rubber list on the edge of the stand (1).
Place the cap on the top of the Mammomat (2).
Fit the cable outlet cover (1) to the stand and fasten with screws (2) and contact
washers (3).
Register 3
1
3
2
SP B7-230.033.07
Rev. 03 11.99
Page 5 of 10 Mammomat 1000/3000
SPS-UD Installation and Start-Up
18 - 5
18
18