Mammomat 3000 - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

1 - 2

MAMMOMAT 3000

Pivoting object-table arm
("Wing 1"+ "Wing 2")
Molybdenum/tungsten anode X-ray
tube assembly with filter disc
Mo 0.03/Rh 0.025/Rh 0.050
Generator with integrated
control panel and radiation shield
Fig. 2
NOTICE
Unless otherwise stated, these instructions describe the stand with pivoted object-table
arm and generator with integrated radiation shield and control panel.
Depending on the installation configuration, some points may be omitted.
Mammomat 1000/3000
Installation and Start-Up
Mammomat 3000 - Basic unit
Free-standing radiation shield
A P40 MoW tube will be delivered irrespective of whether the cus-
tomer has chosen the molybdenum/tungsten anode X-ray tube or
the molybdenum anode X-ray tube. In the last case, the tungsten
anode is deselected by the software.
Register 3 SP B7-230.033.07
Rev. 03
Fixed object-table arm
("Wing 1" + counterweight)
Molybdenum anode X-ray tube
assembly with filter disc
Mo 0.03/Rh 0.025
Separate generator
Separate control console
Page 2 of 6
11.99 SPS-UD
Prerequisites
Siemens-Elema AB
Solna, Sweden
1