Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual page 21

Preparatory work
5.
6.
NOTICE
7.
8.
9.
Fig. 9 Mounting the radiation shield
1
Fig. 10
Siemens-Elema AB
Solna, Sweden
Optional:
Insert sheet-metal strip (5/Fig. 9) (additional radiation protection) into both
stanchions.
Fit the lead-glass (4/Fig. 9) into both vibration absorbing strip (6/Fig. 9) and fix it
softly by screws (1/Fig. 10).
The screws must be mounted before the lead-glass is inserted in
the stanchions.
Fit the lead-glass (2/Fig. 10) into the groove of one of the stanchions (3 /Fig. 10)
and keep it in position while mounting the other stanchion (3 /Fig. 10).
Mount the stanchions and lead-glass unit with 6 screws onto the generator (3, 4 /
Fig. 8) (two persons are required).
Cover the holes with plastic caps (7/Fig. 9).
6
4
5
1
Register 03
2
SP B7-230.033.07
Rev. 03 11.99
3
Page 7 of 8 Mammomat 1000/3000
SPS-UD Installation and Start-Up
3 - 7
7
3
3