Sony LMD-3251MT Manual page 17

Important EMC notices for use in the medical environments
• The LMD-3251MT needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information provided in the instructions for use.
• The portable and mobile RF communications equipment such as cellular phones can affect the LMD-3251MT.
Warning
The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony
Corporation, may result in increased emissions or decreased immunity of the LMD-3251MT.
Guidance and manufacturer's declaration-electromagnetic emissions
The LMD-3251MT is intended for use in the electromagnetic environment specified below.
The customer or the user of the LMD-3251MT should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Warning
If the LMD-3251MT should be used adjacent to or stacked with other equipment, it should be observed to verify normal
operation in the configuration in which it will be used.
Compliance
The LMD-3251MT uses RF energy only for its internal
Group 1 function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
The LMD-3251MT is suitable for use in all establishments,
Class B including domestic establishments and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Class D
Complies
Electromagnetic environment-guidance
5
GB