Quick BTAC Series Installation And User Manual page 6

2 - Supply and equipment
EN
2.0 - Standard supply and material included in the package
• AC thruster
• Drilling template
• Gasket
• Assembly O-ring (only 250/300)
• Installation and use manual
• Conditions of warranty
2.1 - Tools required for installation
BTAC 250 • Drill and drill bits Ø 11 mm (7/6")
• Hollow mill Ø 46 mm (1" 13/16)
• Male hex.wrenches: 4 mm, 5 mm, 8 mm e 10 mm
• Fork or polygonal wrench: 24 mm
BTAC 300 • Drill and drill bits Ø 15 mm (19/32")
• Hollow mill Ø 53 mm (2" 3/32)
• Male hex.wrenches: 4 mm, 5 mm, 8 mm e 12 mm
• Fork or polygonal wrench: 27 mm
BTAC 386
• Drill and drill bits Ø 16 mm (5/8")
• B00 Hollow mill Ø 80 mm (3" 5/32)
• C00 Hollow mill Ø 120 mm (4" 23/32)
• Male hex.wrenches: 4mm, 6mm 5 mm, 8 mm e 14 mm
• Fork or polygonal wrench: 27 mm
BTAC 513 • Drill and drill bits Ø 18 mm (45/64")
• Hollow mill Ø 140 mm (5" 33/64)
• Male hex.wrenches: 5 mm, 8 mm e 14 mm
• Fork or polygonal wrench: 32 mm
BTAC 610
• Drill and drill bits Ø 18 mm (45/64")
• Hollow mill Ø 160 mm (6" 19/64)
• Male hex.wrenches: 5 mm, 8 mm e 14 mm
• Fork or polygonal wrench: 32 mm
2.2 - Recommended Quick
• TCD 2022 • TCD 2042 • TCD 2044 • TCD 2062 thruster controls
• PCS TJ1 • PCS TJ2 thruster proportional controls
• PCS DTW monitor for PCS system
• AC POWER CONTROL device for electrical connections with motor
• INVERTER speed variator for AC motors
• AJ1 Thruster Command thruster control with proportional system
• PAJ 1T AMC • PAJ 2T AMC proportional controls
• AMC central unit for AMC system
6
accessories not included
®
QUICK BTAC SERIES INSTALLATION AND USER'S MANUAL - REV002A
BTAC Series