Quick BTAC Series Installation And User Manual page 16

4 - Installation
EN
4.5 - Propeller assembly
Insert the drive keys A into the holes in the shafts of the gearleg B, assemble the propellers C to the gearbox by engaging them
to the drive keys A, secure the propellers with the self-locking nuts D, (and set screws E, only for BTAC 513/610).
Secure the anodes F with screws G previously smeared with structural adhesive (such as Loctite).
C
WARNING: on conclusion of assembly, make sure that the propeller is exactly positioned at the central point of the
tunnel.
16
B
QUICK BTAC SERIES INSTALLATION AND USER'S MANUAL - REV002A
C
A
BTAC 513/610 ONLY
BTAC Series
D
F
E
G