Logo! Software - Siemens LOGO! 24RC Manual

7 LOGO! Software

The program LOGO!Soft Comfort is available as a pro-
gramming package for the PC. The software has the fol-
lowing functions:
Offline program generation of your application
Simulation of your circuit (or program) on the computer
Generation and printing of a block diagram of the circuit
Saving the program to the hard disk or another storage
medium
Program transfer
– From LOGO! to the PC
– From the PC to LOGO!
The LOGO! alternative
The LOGO! programming software thus represents an al-
ternative to the conventional means of planning:
1. First you develop your applications at your desk.
2. You simulate the application in your computer and test
whether or not it functions properly before the circuit is
actually put to use.
3. You print out the entire circuit in a block diagram or in
several block diagrams sorted according to outputs.
4. You archive your circuits in your PC file system. In this
way you can retrieve a circuit directly if you want to
make changes some time in the future.
5. You transfer the program to LOGO! by pressing just a
few buttons. Your LOGO! is retooled within a very short
space of time.
LOGO! Manual
A5E00067781 01
145