Circontrol eVolve Smart Series User Manual page 55

Value
Stop transaction
when EV
unplugged
Unlock CP
side when EV
unplugged
Supported profiles
Maximum number
of configuration
Keys
Heartbeat interval
WebSocket ping
interval
Metervalue (select
one or more)
Transaction
message attempts
YES: Charge Transaction stops when the cable is disconnected
from the EV
NO: Charge Transaction does not stop when the cable is
disconnected from the EV; furthermore, if it is reconnected
energy transfer is allowed again. It is required for the user to
present the identifier in order to stop the Charge Transaction.
YES: Charge Point unlocks the connector when the cable is
disconnected from the EV
NO: Charge Point keeps the connector locked when the cable is
disconnected from the EV, it is required for the user to present
the identifier in order to unlock the connector
List of supported profiles on the Charge Point
*NOTE: this field is for information purposes, it cannot be modified.
Maximum number of requested configuration keys that can be
requested by the Central System.
*NOTE: this field is for information purposes, it cannot be modified.
Number of seconds between Heartbeats.
*NOTE: setting this value to 0 disables the Heartbeat.
Number of seconds between Pings.
*NOTE: setting this value to 0 disables the Websocket Ping/Pong.
List of supported values used in the MeterValue.
*NOTE: hold 'Ctrl' key in order to select more than one Measurand.
How many times the Charge Point should try to send a request to
the Central System.
Description
53