Circontrol eVolve Smart Series User Manual page 40

eVolve Smart Series User Manual
Value
Use OCPP time
synchronization
Compress OCPP
messages
Energy for Start/Stop
transaction
Energy for MeterValues
Stop charge if StartTrans-
action rejects the user
38
YES: Synchronization of date and time -> Enabled.
NO: Synchronization of date and time -> Disabled.
*NOTE: Date and Time is sent from backend on each
heartbeat response.
YES: Compress messages between Charge point and
backend -> Enabled.
NO: Compress messages between Charge point and
backend -> Disabled.
*NOTE: Before enabling this option consult to your backend
administrator if central system allows this function.
PARTIAL: Consumed value of energy by the vehicle sent
between start and stop.
TOTAL: actual count of the total accumulated energy
meter sent between start and stop.
PARTIAL: Sends partial energy consumption while vehicle
is charging.
TOTAL: sends the actual count of the total accumulated
energy meter.
YES: Stop existing charge transaction after response from
backend (StartTransaction.conf) when user is blocked,
expired or Invalid.
NO: Charge transaction does not stops even if backend
rejects the user. (StartTransaction.conf)
*NOTE: Set this option according to your backend system.
Description