Table of Contents
Advertisement
C
Configuration
Go to the Setup Webpage > 'Integrations' tab
Once OCPP 1.5 option is selected, a link appears allowing access to the
OCPP configuration.
Please, click on the link button as shown in the picture:
New tabs are opened to show OCPP Settings. It can also be accessed directly
typing: http://<IP>:8080/html/setup.html
These tabs require a user identification:
User: admin
Password: 1234
First time is running the integration selected on the Charge Point, it starts as
configuration mode and all fields are empty.
Settings are always stored even when the Charge Point is powered off or even the
integration is disabled/stopped.
33
Advertisement
Table of Contents
Need help?
Do you have a question about the eVolve Smart Series and is the answer not in the manual?