Circontrol eVolve Smart Series User Manual page 41

Value
Stop charge if
StartTransaction replies
ConcurrentTx
Require auth. At remote
Start
Active Power in
MeterValues
Heartbeat interval
Connection timeout
Meter value sample
interval
YES: Stop existing charge transaction after response from
backend (StartTransaction.conf) when user has already
involved in another transaction.
NO: Charge transaction does not stops even if backend
rejects the user. (StartTransaction.conf)
*NOTE: Set this option according to your backend system.
YES: Charge point sends an authorization request before
starting a new remote charge transaction request.
NO: Charge point starts a new remote charge transaction
without authorization request.
YES: Send power (Power.Active.Import) and energy
(Energy.Active.Import.Register) consumed by the vehicle
within meter values requests.
NO: Only energy consumed is sent within meter values
request.
Heartbeat send interval (in seconds) for the back-end
system.
Timeout (in seconds) before connecting to the central sys-
tem.
Meter value sample send interval (in seconds) during
charge transaction.
*NOTE: Meter values are disabled if 0 seconds is set
Description
39