Table of Contents
Advertisement
4. After approximately 30 seconds, you see a sequence of checkpoint codes
5. When the POST menu and indicators displays a screen similar to:
Viewing FRU information
The VPD on each blade server contains details about the machine type or model,
serial number and the universal unique ID.
Complete the following steps to see this information:
1. Start SMS by completing the steps in "Starting SMS" on page 41. The SMS
2. Type 8 to select FRU Information. A screen similar to the following appears:
42
BladeCenter QS22 Type 0793: Installation and User's Guide
displayed on the console. These codes are generated by the Power On Self
Test (POST).
QS22 Firmware Starting
Check ROM = OK
Build Date = Jan 4 2008 11:31:29
FW Version = "QD-1.26.0-0"
Press "F1" to enter Boot Configuration (SMS)
Press "F2" to boot once from CD/DVD
Press F1 to display the SMS menu.
menu appears:
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Main Menu
1. Select Language
2. Setup Remote IPL (Initial Program Load)
3. Change SCSI Settings
4. Select Console
5. Select Boot Options
6. Firmware Boot Side Options
7. Progress Indicator History
8. FRU Information
9. Change SAS Boot Device
--------------------------------------------------------------------------------
Navigation Keys:
---------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key:
---------------------------------------------------------------------------
X = eXit System Management Services
Advertisement
Table of Contents
