Post installation configuration
After you install the operating system on the blade server, you must install any
service packs or update packages that come with the operating system. For
additional information, see http://www.ibm.com/support/us/en/, the instructions that
come with your operating-system documentation and the service packs or update
packages. Some options have device drivers that you must install. See the
documentation that comes with the options for information about installing any
required device drivers.
If your operating system does not have the required device drivers, contact your
IBM marketing representative or authorized reseller, or see your operating system
documentation for additional information.
If you want to use the Wake on LAN feature, ensure that it is active. You might
have to activate it with ethtool.
60
BladeCenter QS22 Type 0793: Installation and User's Guide